Installation Instructions

How to install MOISE.

Warnings & Disclaimers

Wabbajack no longer requires that you have Nexus Premium to install the modlist, however, having Nexus Premium will cut your install time to a fraction of what it would be instead of downloading each mod individually (and save you a thousand clicks or so).

This modlist requires approximately 14GB of storage space on top of the 1.4GB for Morrowind Game of the Year Edition. As usual, installing to an SSD is recommended, but c’mon, this is Morrowind. An HDD will be fine.

Download and installation times vary based on your computer and internet speeds but expect them to take at least one hour with 20-30 minutes of after-Wabbajack work. Note that Morrowind requires a bit more work after WJ is done than other modlists due to the amount of extra executables involved.

I will do my best to provide support for adding mods to this list, but I make no promises. If you break it, it’s on you to fix it.

System Specifications

Let’s be real. Morrowind could run on a toaster at this point. However, there are a few options selected that may make particularly old/slow hardware struggle. Below are my system specifications. I have zero issues with stutter, loading times, or anything else.

  • CPU: AMD Ryzen 9 3900X @ 4.2GHz
  • RAM: G.Skill TridentZ Neo 32GB DDR4 3600MHz CL16
  • GPU: nVidia RTX 2080 Super 8GB (8192MB actual)
  • Monitor: Dell S2716DGR 2560x1440 @ 144hz
  • Storage: Sabrent Rocket 2TB M.2 NVMe 2280; Samsung EVO 860 250GB; SeaGate Barracuda 2TB 7200RPM

In general, I would recommend at least 4GB of VRAM and 8GB of RAM just to be on the safe side.

Morrowind Setup

To get your Morrowind to this state, follow these steps:

  1. In Steam, uninstall Morrowind (Right-click > Manage > Uninstall).
  2. If there are any files leftover in the Morrowind game folder (Right-click > Properties… > Local Files > Browse Local Files…), delete them.
  3. Install Morrowind.
  4. In Steam, set Morrowind to update only when opened. (Right-click > Properties… > Updates > Automatic updates > Only update this game when I launch it)
  5. Run the Morrowind Launcher to create any INI or registry entries the game needs. Immediately exit after this. The INIs will be overwritten by the ones included in the Wabbajack installer.

Make sure you have installed the English version of the game, other languages will cause Wabbajack to throw an error while verifying the game’s files match what it is expecting.

Additionally, you will need to install Visual C++ 2010 Service Pack 1 x86.

Installation Setup

  1. Download the latest version of Wabbajack. Do not run anything until instructed to do so.
  2. Create a new folder in the root of the drive where you want Wabbajack to be installed. (C:\ will be used as an example, but it can be placed in any drive.) Name this folder “Wabbajack”. Important: Wabbajack must be placed in a separate folder from where the installation will occur.
  3. Create a second folder called C:\MOISE. This folder is where everything for the modlist will be installed.
  4. Ensure that C:\MOISE is completely empty.
  5. Ensure that Wabbajack.exe and the .wabbajack file are in C:\Wabbajack.

Wabbajack Installation

  1. Run Wabbajack.exe. At the bottom of the window, click Install a Modlist.
  2. Select MOISE from the list of modlists and click the down-arrow icon to download the installer.
  3. Click the “play” icon when it has finished.
  4. Set the Installation Location to C:\MOISE. The download location does not need to be set manually unless you have drive space limitations. Downloading to a separate folder is fine (for example, on a HDD), but as before it is recommended that the actual install be placed on a SSD.
  5. Click Run.
  6. Wabbajack will walk you through logging into the Nexus and authorizing an API key so it can download mods if you have not done so previously.

With Nexus Premium

  1. Wabbajack will walk you through logging into the Nexus and authorizing an API key so it can download mods if you have not done so previously.
  2. Let Wabbajack do its thing. This will take a little while (usually 1-2 hours at most), so go get a snack and read a book for a bit. If you have good enough internet, YouTube is also your friend here.

Without Nexus Premium

  1. Wabbajack will prompt you to click all the needed buttons to download the modlist. Be prepared for this to take a really long time, possibly more than one day. Also be aware that due to the amount of time required when installing this list manually, the list may update during the time it takes to install and you may need to start over if that happens. Put on some music or a TV show and make a day of it.

Once complete, Wabbajack will say “Installation complete! You may exit the program.” If it does not, visit the Wabbajack Discord server for assistance. Don’t forget to upload your log file!

If Wabbajack fails to download a particular mod, it means that the mod has likely been updated. This also means that an update to MOISE is imminent. Be patient and wait for the new release. Do not ask other people to share old versions of files as this is a violation of the Nexus ToS.

Post-Wabbajack Install

Game Folder Files

Now you have to copy some files to their correct locations.

  1. Navigate to C:\MOISE\Game Folder Files.
  2. Copy all of these files into [Steam Install Location]\steamapps\common\Morrowind\ and Overwrite if prompted.

Morrowind Code Patch

Unfortunately, MCP doesn’t come pre-configured because that would require redistributing a copy of the Morrowind.exe which is 100% illegal. So, we have to do it manually.

  1. Run the Morrowind Code Patch.exe file from inside your Morrowind install folder.
  1. The only required options in MCP for MOISE are as follows:
    • Mod specific:
      • Scripted music uninterruptible
      • Separate axe inventory sounds
      • Hi-def cutscene support
      • Improved animation support
  2. After selecting the required options, configure MCP to your liking.
  3. Click “Apply chosen patches”.


Last, we have to update the Morrowind Script Extender.

  1. Navigate to your Morrowind install location.
  2. Run MWSE-Update.exe and let it finish. It will close automatically when complete.

Mod Organizer 2

  1. Navigate to C:\MOISE and open ModOrganizer.exe. Your Mod Organizer window will have a dark theme already selected. If it doesn’t, something has gone wrong and you’ll likely need to do the Wabbajack installation again.
  2. A dialogue will appear and ask if you want to associate Mod Organizer with nxm links. Click Yes.’

Configuration Specific

The following steps only need to be used if you are running the game at either the 16:10 or 4:3 aspect ratios.

  1. Near the bottom of the left pane of MO2, find the “HD Intro Cinematic” mods.
  2. Disable whichever one is currently enabled.
  3. Enable whichever one matches the aspect ratio of the game you’ll be playing it at.


Go to the folder where WJ downloaded all the mods and open the MGE XE Manual Install-41102-0-11-6-1560626592.7z file. Copy all of the files here into your Morrowind install folder and overwrite when prompted.

MGEXEgui also needs to be manually configured so that certain graphics options are enabled. Select “MGEXEgui” in the dropdown menu next to the Run button in MO2 and then click Run. Configure it as follows.

  • Graphics tab
    • Click select screen resolution and pick your screen’s resolution.
    • Windowed mode: Enable
    • Borderless window: Enabled
    • Enable Shaders: Enabled
  • Distant Land tab
    • Use Distant Land: Enabled
    • Draw Distance: 10 cells (recommended)
    • Dynamic ripples: Enabled
    • Per-pixel lighting shader: Enabled
  • In-Game tab
    • Allow yes to all load errors: Enabled
    • Allow screenshots: Enabled

If you’d like you can set up whatever shaders you’d like by clicking on the “Shader setup…” button. Note that the shaders, if set too high in terms of quality, can have significant impact on performance. I personally like the High preset.

Launching the Game

In Mod Organizer 2, select Morrowind from the drop-down menu next to the Run button and click Run. This is how MOISE should always be launched. You can create a shortcut on your desktop if you wish using the Shortcut button under the Run button.

Wabbajack Issues

Texture_Fix_Bloodmoon_1.1 failed to download

As a temporary solution until the list is properly updated, Please download this alternate Wabbajack file from this link. Restart Wabbajack and use the Install from Disk option, Select the Wabbajack file you’ve just downloaded as the Target Modlist and leave your Install and Resource paths as they were to resume your install.


Morrowind is a very temperamental game. Here are some common fixes for issues you may encounter.

My game crashes immediately!

MGE XE can sometimes be corrupt upon installation. Go to the folder where WJ downloaded all the mods and open the MGE XE Manual Install-41102-0-11-6-1560626592.7z file. Copy all of the files here into your Morrowind install folder and overwrite when prompted. You will not have to configure MGE XE again when doing this. If this still doesn’t fix it, try running MO2 and therefore Morrowind as Administrator.

The game is saying there are missing mods!

Morrowind is wrong. This, to put it simply, happens when the mods installed changed since the last time you launched Morrowind. This warning can be safely ignored. Saving your game should remove the error.

Adding Mods

In general, you should be able to build on top of MOISE. Feel free to fork it and make your own Morrowind modlist if you want.

The only thing that needs to be mentioned is that MOISE is 100% incompatible with OpenMW, so mods that require it and OpenMW itself will not work under any circumstances.